Solax S3025, Руководство пользователя

Страница: 36 / 52

34
Rudder handle
-Adjust the appropriate height:
1. Turn on the rudder adjusting switch to
release the handle riser, and then turn off
the switch after the height of the riser is
retracted in place. (as shown in Figure 9)
-Adjust the appropriate inclination:
2. Press down the rudder adjusting rod to
make the handle riser loose,
After the riser is tilted and adjusted in
place, release the adjusting rod. (as
shown in Figure 10)
Figure 9
Figure 10
Controller
The controller is fixed in the rear housing to receive the signal from the control panel
and transmit it to the motor, brake and charging stand.
Do not place the controller in a humid area. If the controller has been damped, it must
be completely dry before driving, otherwise the controller will be damaged.
Brake
It is equipped with electromagnetic brake, which can't cut off the brake manually.
When it is necessary to move the scooter manually, the front of the vehicle can be
raised to pull the scooter or folded and pulled.
Motor / Drive assembly
The motor / drive assembly is an electromechanical part that converts battery power
to rear wheel drive energy.