4. Installation
4. Installation
28
29
For T-BAT H 5.8 + 1~3 battery packs:
1. Connect the cables at one end of the T-BAT H 5.8/HV11550.
2. Get the cables through the corrugated pipe.
3. Set the cables into the groove of metal plates and screw them back to the
battery pack on both sides.
4. DO remember to insert the series-connected plug at “-” and “YPLUG” on the
right side of last battery pack to make a complete circuit.
CAUTION!
One T-BAT system is allowed to install one T-BAT H 5.8 plus at most three
battery packs. Connecting more than three battery packs will blow the
fuse, and the battery pack will be damaged. Please make sure the
number of battery packs meets the requirement.
4.6
Overview of Installation
The following diagram is a complete T-BAT system installation with T-BAT H 5.8 +
three battery packs.
