Mechanical Installation
Mechanical Installation
31
30
WB-32
WB-32
WB-32
WB-32
WB-32
WB-32
WB-32
Step 2: Hang and fix the inverter on the bracket
13
.
8
lbf.in/
1
.
5 N·m
Cross screwdriver
a) Place the rat guard on the correct position of battery’s BMS prior to the
installation of inverter to bracket and fix it with the inverter bracket with M5 screws;
b) Place the inverter to be seated on the corresponding position of the
bracket. As A1-HYB-G2 series inverters are heavy, weigh 75lbs/34Kg. They should
be lifted up by two persons and placed carefully onto the bracket. Then adjust the
inverter to be centered on the whole system;
Back view
Front view
c) Pre-mount the fixing plate on the two sides of metal cover and mount
the metal cover on the inverter. Please make sure the four dowel pins are inserted
into the holes of BMS and adjust the whole system (inverter and battery) to be
leveled;
Inverter
BMS
Dowel pins
Pins holes
NOTE!
Before mounting the metal cover, the wiring connection between
battery and inverter must be completed. For detailed information
about how to connect the battery to the inverter, please refer to
Chapter 6 “Electrical Connection”.
10
.
4
lbf.in/
1
.
2 N·m
Cross screwdriver
