solasfires.com
7
SÓLAS ONE-TOUCH REMOTE OPERATION
PM
AM
PM
AM
TO TURN ON FIREPLACE
CAUTION
WHEN PILOT IGNITION IS CONFIRMED, MOTOR
TURNS AUTOMATICALLY TO MAXIMUM FLAME
HEIGHT.
One-Touch Lighting (default):
Press and hold for 4 seconds,
until 8 short beeps and a blinking
series of lines confirms the start
sequence has begun. Release
button.
Main gas flows once pilot ignition
is confirmed.
Remote automatically goes into
manual mode after main burner
ignition. The fireplace will default
to HI flame.
STANDBY MODE (PILOT FLAME)
Press and hold to set
appliance to pilot flame.
CAUTION
If the pilot does not stay lit after several tries call your
local service technician or gas supplier.
TO TURN OFF FIRE
• Press to turn OFF.
When the pilot is off, it will
take 2 minutes before it
can be lit again.
NOTE:
There is a 2 minute delay
after switching off before the next
ignition is possible.
CAUTION
Always check the fire and pilot visually to ensure they
are off.
FLAME HEIGHT ADJUSTMENT
To increase flame height, press and
hold .
To decrease flame height, press and
hold . You may hold the button
down until the fire is set to pilot
flame only.
DESIGNATE LOW AND HIGH FIRE
Double-Click DOWN Arrow
button. “LO" is displayed.
NOTE: Flame goes to high fire first
before going to designated low fire.
Double-Click UP Arrow button.
Flame automatically goes to high
fire. “HI" will be displayed.
PM
AM
AM
AM
