background image

solasfires.com

11

SÓLAS ONE-TOUCH REMOTE OPERATION

SÓLAS ONE-TOUCH REMOTE TIPS

•   Double-click   to go directly to LO (lowest) 

flame setting.

•   Double-click   to go directly to HI (highest) 

flame setting.

•  The batteries in your SÓLAS one touch remote control 

and control module are to be replaced annually. Only 

use brand name alkaline batteries such as Duracell or 

Energizer.

•  When using the Remote, it should be within 15 feet 

(4.5 meters) of the fireplace.

•  Don’t leave the Remote on the mantel or hearth or any 

hot surfaces. Use the Remote wall holder provided.

•  To keep out of children’s reach, use the Remote wall 

holder provided.

•  Be patient when programming: it takes time to set-up.
•  Once you turn a pilot off, it takes a few minutes before 

your can turn it back on.

ERROR 

CODE

MESSAGE

DURATION OF 

DISPLAY

SYMPTOM

POSSIBLE CAUSE

F04 

F04

4 seconds 

•  No pilot flame within 30 sec

•  Note: After 3 failed ignition 

sequences, F06 shown

• No gas supply

• Air in pilot supply line

• No spark

•  Reversed polarity in thermocouple 

wiring

F06 

F06 

4 seconds  

•  3 failed ignition sequences 

in 5 minutes

•  Fire is not responding, 

no pilot flame

• No gas supply

• Air in pilot supply line

• No spark

•  Reversed polarity in 

thermocouple wiring

•  Incorrect pilot orifice if valve has 

been converted from LPG to NG 

or vice versa

F07

Low Battery 

Symbol 

Permanent

•  Battery icon flashes on 

Remote display

• Low battery in Remote

F09

F09

4 seconds

• Fire is not responding

• No electronic control of fire

•  Down arrow button   was not 

pressed during pairing

•  Control Module and Remote are 

not synced

F46

F46

4 seconds

• Fire is not responding

• Intermittent response

• No electronic control of fire

•  No or bad connection between 

Control Module and Remote

•  No power at Control Module

•  Low communication range 

(Control Module Faulty, Remote 

not communicating with 

Control Module)

Your SÓLAS Dealer is here to help, if you have any trouble with your SÓLAS 

Fireplace or SÓLAS One-Touch Remote. Please contact your Dealer for support.

Содержание One-Touch Remote













Отзывы: