Solas BI-46N-SS Скачать руководство пользователя страница 43

solasfires.com

43

SETTING CELSIUS OR FAHRENHEIT

To change between °C and °F, press and hold   +    

simultaneously.

Note:  When Remote is in °C 

(Celsius) mode the clock will 

be 24-hour. When Remote is 

in °F (Fahrenheit) mode the 

clock will be 12-hour. 

 

SETTING THE TIME

1.  Press  +  simultaneously. Day flashes.
2.   Press 

+  to select a number to correspond 

with the day of the week. 
•  1 = Monday 

• 2 = Tuesday 

• 3 = Wednesday 

• 4 = Thursday 

• 5 = Friday 

• 6 = Saturday 

• 7 = Sunday

3. Press  +  simultaneously. 

Hour flashes.

4. To select hour press  or  .
5. Press  +  simultaneously. Minutes flash.
6. To select minutes press  or  .
7. To confirm, press  or   simultaneously or wait.

CHILD PROOF

Your Remote can be set to lock out all commands to the 

fireplace, except OFF.
To turn Child Proof ON:
1.  Press and hold   +   simultaneously.
2. 

is displayed. Child Proof is now active.

To turn Child Proof OFF:
1.  Press and hold   +   simultaneously.
2.  

disappears. Child Proof is now inactive, and the 

Remote has full function. 

COUNTDOWN TIMER

You can set your fireplace to automatically turn off at the 

end of a timer.
To set a Countdown Timer:
1.  Press and hold   until   is 

displayed. Hour flashes.

2. Press  or   to select Hour.
3. To confirm, press  . Minutes flash.
4. Press  or   to select Minutes.
5. To confirm, press   or wait.
To turn off a Countdown Timer:
1.   Press  , and the  countdown 

disappears.

NOTE:  The Countdown Timer only works in Manual and 

Thermostatic modes. Maximum countdown time is 

9 hours and 50 minutes. 

COMFORT BLOWER OPERATION 

Setting:
1.  Press and hold   until   flashes.
2.   Press 

 to increase or   to 

decrease Comfort Blower speed.

3.  To confirm setting, either press   

or wait.   is displayed.

OFF:  Press   until all 4 speed level 

bars disappear.

NOTE:  When setting, if the Comfort 

Blower was not switched off 

after last use, it starts automatically 4 minutes 

after ignition at maximum speed, and goes to 

the last set level after 10 seconds. The Comfort 

Blower stops 10 minutes after the main burner is 

extinguished. 

PM

AM

AM

SÓLAS ONE-TOUCH REMOTE OPERATION

Содержание BI-46N-SS


























































Отзывы: