SolarWorld Sunfix Bisun Скачать руководство пользователя страница 5

55

A2

 

Safety instructions

DANGER! 

  Danger of death from electric shock

 

f

Solar modules generate electricity as soon as they 
are exposed to light. The voltage of a single modu-
le is lower than 50 V direct current (DC). When 
several modules are connected in series, the total 
voltages are cumulative and dangerous. When 
several modules are connected in parallel, the cur-
rents are cumulative. Although touch protection 
is provided in the form of the fully insulated plug 
contacts, the following points must be observed 
when handling the solar modules to avoid the risk 
of fire, sparking and dangerous electric shock:

 

f

Do not install solar modules and wiring using wet 
plugs and sockets!

 

f

Utmost caution must be exercised during all work 
on the wiring!

 

f

The inverter can produce high touch voltages, 
even when not connected!

 

f

Exercise caution during all work on the inverter 
and wiring!

DANGER! 

  Danger of death from arcing

 

f

Modules generate direct current (DC) when light 
strikes them. When breaking a connected string 
of modules (e.g. when disconnecting the DC line 
from the inverter under load), a dangerously 
strong arc can occur. Note the following:

 

f

Never remove the solar generator from the inver-
ter while it is still connected to the grid.

 

f

Ensure that the cable connections are in perfect 
condition (no gap, soiling)!

WARNING! 

  Danger of falling

 

f

There is a risk of falling when working on the roof 
and when climbing up and down. You must obser-
ve the accident prevention guidelines and use 
suitable fall protection equipment.

WARNING! 

  Flammable materials

 

f

Modules must not be operated near equipment or 
in locations where flammable gases or dusts are 
emitted or can collect.

CAUTION!

  Hand injuries

 

f

Hands can be crushed during the installation of 
support frames and modules.

 

f

Work may only be carried out by trained staff.

 

f

Use protective gloves!

CAUTION!

  Falling objects

 

f

When mounting on the roof, there is a risk of tools, 
mounting materials or modules falling from the 
roof and injuring persons who are present below. 

 

f

Cordon off the danger area on the ground before 
starting installation work, and warn persons in the 
vicinity. 

Содержание Sunfix Bisun

























Отзывы: