Part No. 502621 Issue 10
14
5.0: Setting up the Transducer
and OD4
5.0: Setting up the Transducer and OD4
The OD4 may be set-up with output signals
anywhere within a ±10 VDC or ±20 mA range.
Typical outputs are ±10 VDC, ±5 VDC, 0-10 VDC
and 4-20 mA. These procedures apply to voltage
and current output.
Voltage and current output are available at the same
time, although they cannot be individually adjusted.
Either voltage or current should be chosen as the
calibration reference.
All outputs use 0V signal as the signal reference.
A list of standard link settings is available,
see section 5.2.
CAUTION:
During installation and adjustment, the
top of the enclosure has to be removed
for access to user adjustments. At this time,
standard ESD handling precautions for
electronic equipment should be followed.
