EN
27
GENERAl oVERVIEW
Manual
Digital/Professional
The front and body panels of the Electric Convector Heater are
made of sheet metal suitable for cold rolling. The unit provides
heating with the grids on the resistor inside. The cold air
entering through the channels on the lower skirt of the body
passes through the heated grids of the resistor and exits as warm
air through the grids on the front panel. This air circulation
provides heating through natural heat convection.
These heaters provide a great advantage as they are lightweight,
heat quickly and take up a very small space.
The paint used on the heaters contains no chemicals harmful to
human health.
The Electric Convectors are offered in three different models:
Manual, Digital and Professional.
1. Body
2. Front Panel
3. Thermostat and Adjustment Knob/Manual Electric
Convector Heater-Electronic Control Panel/Digital and
Professional Electric Convector Heater
4. Resistor
5. Safety Thermostat/Manual Electric Convector Heater-
Room Temperature Sensor/Digital and Professional Electric
Convector Heater
6. Roll-Over Protection/Manual Electric Convector Heater-
Safety Thermostat/Digital and Professional Electric Convector
Heater
7. Power Switch
8. Power Cord with Plug
model
Recommended Heater power (watt)
Room Area (m2)
KIP 4550 E10/M10/P10
1000-1200
6 - 12
KIP 4570 E20/M20/P20
2000-2400
12 - 24
Convector Heater model Selection
Figure 1. Electric Convector Heater, front view
Содержание KIP4550E10
Страница 44: ...10 2020 since...