Solaris KIP4550E10, Руководство пользователя

Страница: 24 / 44

24
SAFETY INSTRUCTIONS
• Switching the unit off by disconnecting the power or directly turning the power switch to the “0” position
while the unit is operational may damage the product. Be careful not to switch it off in such a manner. The
unit should be unplugged or the power switch should be turned off after the unit is turned off using the on/
off switch on the control panel or the remote control.
• Electric panel convector heaters has been adjusted for 230 V. Therefore use the convector only with the
Alternative Voltage (AC) and sufficient current rated power outlets.
• Use your electric panel convector heater with grounded plug socket. Our company will not be deemed
responsible for the damages caused due to use without the application of grounding.
• Always operate heater in an upright position. Before operating read montage instructions carefully.
• Always check heater for black-glass models after you’ve opened the packaging. Call the Distributor’s
Consumer Advisory Hotline in case a breakdown or damage. Never mount or use your heater. Please refer to
the dealer with warranty card and bill.
• If you use wheel set, heater should be positioned on a flat surface.
• Unplug of your electric panel convector heater from the mains socket while not in use for long periods and
before cleaning.
• Do not place the cord in traffic areas otherwise it may be tripped over.
• Protect your electric panel convector heater against impacts and crushes during carriage, assembly and use.
• Do not use your electric panel convector heater for any other purpose than its intended use for. Do not place