Solaris HITMAN 230, Руководство пользователя

Страница: 5 / 20

5
SOLARIS® HITMAN230™
The SOLARIS® HITMAN 230™ is a high-performance moving head lighting fixture with a
230W HRI 7R 230W lamp. A compact design makes it ideal for Venue Installations, Theatri -
cal, Cinema, TV and Stage Use.
The fixtures features a rotating and indexing gobo wheel with 17 gobos, a color wheel with
14 color filters with Half-Color Capability, high grade smooth mechanical step motors fitted
for seamless moving of all the mechanical parts.
The SOLARIS® HITMAN230™ also features a pan\tilt feedback, coarse and fine control of
movements and effects. The fixture also includes motorized focus and Frost.
The fixture can be controlled using any DMX-compliant controller as well as automatic oper -
ation mode , sound to light mode and manual mode.
BEFORE USING THE PRODUCT FOR THE FIRST TIME
1. Read ’Safety information’ on page 4 before installing, operating or servicing the fixture.
2. Unpack and ensure that there is no transportation damage before using the fixture. Never
attempt to operate a damaged fixture.
3. If the fixture is not going to be hard-wired to a mains supply, attach a local power plug to
the end of the supplied power cable.
4. Before operating, ensure that the voltage and frequency of the power supply match the
power requirements of the fixture.
5. Refer to the GLOW® website for the most recent user documentation and technical infor -
mation about this fixture.
MAXIMIZING LAMP LIFE SPAN
To make sure you get the most out of the lamp life span please follow these simple steps:
1. Each time you power the lamp on, allow it to warm up for at least 5 min before shutting it
down.
2. After the lamp is turned off allow the lamp at least 8 minutes to cool before moving the
fixture.
3. Before shutting the power completely, power off the lamp but leave power applied to the
fixture for a few minutes so that the cooling fans can prevent any momentary temperature
increase caused by heat emitted from the other components.
INTRODUCTION