SolarEdge SE-MTR240-NN-S-S1, Руководство по установке

Страница: 29 / 47

D e v P r o t # #
R S 4 8 5 - 1 < M T R > < W N > < 1 >
R S 4 8 5 - 2 < - - - > < - - > < - - >
Z i g B e e < - - - > < - - > < - - >
Dev : the type of device connected to this port. MTR indicates a meter.
Prot : the communication protocol
## = 1 : Indicates that the connection to the meter is successful.
4. Continue pressing the Enter button or the LIGHT button using short presses until
reaching the meter status screen showing the Energy [Wh] total. If there is more
than one meter/ function, there is a status screen for each one. The following is an
example of an Export meter:
E x p o r t M e t e r
S t a t u s : < O K / E r r o r # >
P o w e r [ W ] : x x x x x . x
E n e r g y [ W h ] : x x x x x . x
Status : Displays the state of communications between the meter and the inverter.
Displays 'OK' if the meter is communicating with the inverter.
< Error message >: If an internal meter error occurs, it will be displayed here.
Refer to
Troubleshooting the Meter on page 29.
Power [W] : Displays the exported or imported power.
Energy [Wh] : Displays the total energy read by the meter.
Energy Meter with Modbus Connection MAN-01-00270-1.3
28 Device Configuration