SolarEdge L20-IB00, Руководство пользователя

Страница: 31 / 81

22 L20, L30
Figure 15 Muser5000 user setting page

At the window of “Data Set”, click “Work Mode”, choose “Parallel” for the value, thenclick
“Set” as shown in below picture. If the UPS sounds a “beep”, that means the setting is
correct.
Figure 16 Muser5000 work mode setting page

At the window of “Data Set”, click “Ups ID”, write a value for the parallel UPS ID at the
right side, such as “1”, then click “Set” as shown in below picture. If the UPS sounds a
“beep”, that means the setting is correct.