SolarEdge 02-700004 Скачать руководство пользователя страница 5

Страница: 5 / 111

Torque for connecting DC strings to the fuse holders in the DC Safety Unit: 3.4 N*M

/ 30 lb*in

Addition of link to the Designer web page

Updated warning about sealing unused power optimizer input connectors

DC safety voltage is 1V (±0.1V)

Addition of link to Three Phase Inverters for Delta Grids application note

Addition of RS485-2 support

Version 3.3 (Aug. 2017)

Updated the Safety section: New warning - The Safety Switch meets all

requirements for a code-compliant installation of this system. The DC Disconnect

Switch disconnects both the positive and negative conductors.

In Supported AC Grids, added: Ground connection is required for all grids

In Power Optimizer Installation chapter:

Updated string extension cable length

Added information for connecting multiple modules in parallel to an optimizer

Removed reference to racking models and their grounding methods

Removed mentioning of tracker

In inverter Installation chapter:

Added note about copper conductors

Removed previous interface panel description and images, and type 1 bracket

In Inverter Interfaces - updated ON/OFF switch description

Added a caution about not altering the DC Safety Unit enclosure: SolarEdge

does not permit opening or puncturing the Safety Switch in any location other

than the pre-defined drill guide locations, or otherwise altering the

construction of the enclosure, as this may compromise safety and will void the

warranty.

Reference to horizontal mounting application note

Updated clearance specifications

Connection to/from the Connection Unit:

Three Phase System MAN-01-00507-4.2

Revision History

Содержание 02-700004
















































































































Результаты поиска

Содержание 02-700004

Отзывы:

Бренды по названию

Популярные бренды

SolarEdge 02-700004, Руководство по установке

Результаты поиска

Содержание 02-700004

Отзывы:

Бренды по названию

Популярные бренды