August 2020
|
Solar Stik
®
, Inc.
30
|
24VDC PRO-Verter 7000-120 AGS Operator Manual
Figure 12. PRO-Verter Faceplate
LCD User Interface
– The LCD screen and the associated buttons and LEDs are used to program
and control the PRO-Verter and to control and monitor the status of the System. The PRO-Verter is
programmed at Solar Stik to meet the specifications of a specific application. Programming mode is
blocked and password protected but can be accessed if reprogramming is required by contacting
Solar Stik Technical Support (800-793-4364 Ext. 102; 24 hours a day, 365 days a year).
Generator (TQG) Status LEDs
– The LED on the left blinks green during generator start; it is
steady-on green when the AGS circuit is functional and when the generator is running. The LED is
red if there is a generator fault. (For an AMMPS generator, these LEDs are active but do not report
the status of the generator.)
Auto Generator Start (AGS) Alarm ON/OFF Switch
– In the ON position, an alarm will sound
as warning that the generator has initiated the auto-start protocol and is about to start. The OFF
position disables the alarm for silent operations.
Auto Generator Start (AGS) Test Button
– The Test Button is a push-button momentary switch that
allows the AGS system to be tested for correct wiring and generator start/stop operation.
Faceplate Features and Descriptions
24VDC PRO-Verter 7000-120 AGS
LCD User Interface
RMK Mounting Location
INVERTER
Port
ETHERNET Port
REMOTE Port
Auto Generator Start (AGS)
Alarm ON/OFF Switch
Fans 1 A Max Breaker/LED
Generator (TQG) Status LED
DC Out 5 A Max Breaker/LED
24 VDC 5 A Output Auxiliary Plug
Auto Generator Start Test Button
AC In 60 A Max Breaker /LED
Gen Circuit Ready LED
AC Out 15 A Max Breaker/LED
AC Out 35 A Max Breaker/LED
