Solaire GODDESS Royal Collection T6000 S, Инструкция по эксплуатации

Страница: 11 / 16

11
6. Maintenance Cont’d
5. T6000 Spray Gun - Weekly Clean.
Perform the Daily procedure then continue:
a. The Solution needle (#8, Diagram on page 6) To remove: Face the front of the gun away from you, turn the Solution
flow screw anti clockwise until it comes out of the Spray Gun. Be careful when removing the solution flow Screw as
there is a small spring (#9, Diagram on page 6) around the needle. Do not loose it. This is important to the operation
of the T6000 Spray Gun. Set the spring aside and pull the trigger all the way back until you can grab the needle with
your finger tips and pull it out from the back of the T6000 Spray Gun. Once removed, rinse under the warm running
water, dip into AIRBRUSH CLEANER and dry. Add gun lubrication to the needle. Simply rub a small amount of
Spray Gun lube around the needle shaft and spring. Later to reinstall repeat these steps in reverse.
b. The solution nozzle ( #3, Diagram on page 6) can be removed for additional cleaning if necessary, the needle must
first be removed to do this procedure. With an adjustable wrench or spanner, place the tip of your adjustable wrench
or spanner on the two flat areas of the nozzle (whilst the gun is facing you) and twist anti clockwise. Be careful.
There is a solution nozzle gasket (#4, Diagram on page 6) around the threads of the solution nozzle. Be sure to
reinstall or leakage will occur. Rinse under warm running water, take a cotton bud dip it into gun cleaner and clean
inside the threads. DO NOT USE ANYTHING METAL as it will scratch the threads or nozzle and this will cause
leaking. To reinstall repeat these steps in reverse.
c. Please see Spray Gun maintenance cleaning video at: http://www.solaire.com.au/Main.asp?_=Sunless Education
HVLP Gun/Airbrush Cleaner:
Specially formulated to breakdown and remove spray tanning ingredients and residue from Airbrush/HVLP tips & nozzles.
When using spray tan in your T6000 spray gun it can leave a build-up of residue that, overtime,
can clog your T6000 spray gun tip and interfere with the effectiveness of your spray pattern.
Solaire’s Airbrush Cleaner is specifically developed to breakdown the residue left in your airbrush
tip or spray gun nozzle.
Spray Gun Lube
Spray Tan Gun Cleaner
Available through our Office – please call us!
*Excluded any parts that may be required to be replaced.
®
®