Solaire GODDESS Royal Collection T6000 S, Инструкция по эксплуатации

Страница: 5 / 16

5
2. Set up and operate your GODDESS Royal Collection ™ Tanning System
1. Plug the GODDESS Royal Collection™ tanning system unit into a proper electrical outlet. Make sure that the electric
current you are connecting to is the same as your unit. (240v). DO NOT attempt to connect the unit to the wrong
electric current as this will not only damage your unit but also void your warranty.
2. Next, locate the male end of the air hose and connect it to the female quick connect on the GODDESS Royal
Collection™ tanning system.
a. To insert the male connection pull back on the ring of the black coupler located on the GODDESS Royal
Collection™ tanning system and insert the male connector on the hose. Figure 6.
Fig. 6
b. Release the ring to allow the coupler to snap into place. The hose should now be connected to the unit
Figure 7.
Fig. 7
c. To remove the air hose, pull back on the ring of the black coupler and remove
If you have just finished spraying, the connector may be hot. Allow the GODDESS Royal Collection ™ unit to cool
down for about 10 minutes before disconnecting the air hose from the GODDESS Royal Collection ™ unit. Use
Caution!
5
2 Set up and operate your PRINCESS Tanning System:
1. Plug the PRINCESS tanning system unit into a proper electrical outlet. Make sure that the electric current
you are connecting to is the same as your unit. (110v or 220v). DO NOT attempt to connect the unit to the wrong
electric current as this will not only damage your unit but also void your warranty.
2. Next, locate the male end of the air hose and connect it to the female quick connect on the PRINCESS
tanning system.
a. To insert the coupler pull back on the ring of the black coupler located on the PRINCESS tanning
system and connect it to the male connector on the hose. Figure 6.
Fig. 6
b. Release the ring to allow the coupler to snap into place. The hose should now be connected to the
unit Figure 7.
Fig. 7
c. To remove the air hose, pull back on the ring of the black coupler and remove
If you have just finished spraying, the connector may be hot. Allow the PRINCESS unit to cool down
or about 10 minutes before disconnecting the air hose from the turbo unit. Use Caution!
®
®