Solahart POWERPAK 10 kW, Руководство пользователя

Страница: 15 / 19

POWER PAK Owner’s Manual 14
Issue Date February 2004
checked for possible damage. This would normally be found around sharp edges such as roof flashing etc.
If the multimeter shows a short circuit, than the cable to the sensor should be checked for possible damage. This
would normally be found around sharp edges such as roof flashing etc or a nail or staple through the cable.
If the cabling is correct the multimeter should indicate a resistance reading which reflects the temperature at the
sensor location as shown on the table below:
ºF ºC Ohms Resistance ºF ºC (Approx) Ohms Resistance
41 5 25380 122 50 3600
50 10 19890 140 60 2490
59 15 15710 149 65 2090
68 20 12490 158 70 1750
77 25 10000 176 80 1250
86 30 8057 194 90 920
104 40 5326 212 100 680
TECHNICAL DATA
Dimension Detail
10 kW Module
Collector Panel Data
•
Selective Surface
•
Absorptivity = 0.93 (± 0.05)
• Emittance = 0.12 (± 0.02)
• Glass = Low Iron with 94%
transmittance
Solahart Collector Panel Details