20
TROUBLESHOOTING
The indicator does
not light when
charging
Badly connected cable to
unit or mains
Connect the cable correctly to the unit
and the charger to the mains supply
Mains socket not working
Contact an electrician to have it
repaired
The vacuum does
not suck
The suction nozzle or tube
(10) is partially blocked
Remove the dirt blocking the suction
nozzle (C)
The filter assembly (15) is
blocked
Follow the CLEANING &
MAINTENANCE instructions
Dirt on the multi-purpose
brush (22) is preventing it
from rotating
Follow the CLEANING &
MAINTENANCE instructions
The motor for the multi-
purpose brush (22) has
overheated due to tangled
waste
_Slide the On/Off switch to the O
position.
_Allow the unit to cool down
_Follow the instructions for cleaning
the multi-purpose brush described in
the CLEANING & MAINTENANCE
section
The vacuum has lost
suction power, is
noisier or whistles
The suction nozzle or tube
(10) is partially blocked
Remove the dirt blocking the suction
nozzle.
The dust container (11) is
full
Empty it as described in CLEANING &
MAINTENANCE
The dust container (11) is
not fitted correctly
Fit it correctly
The suction head (20) is
dirty
Follow the CLEANING &
MAINTENANCE instructions
The foam motor protection
filter (16) is saturated
Follow the CLEANING &
MAINTENANCE instructions
The vacuum is
difficult to move
Suction power too high
Reduce the suction power
Rear wheels are dirty
Clean the rear wheels
AE2550.book Page 20 Thursday, November 14, 2013 5:37 PM
