14
SAFETY INSTRUCTIONS
use of adhesives is not considered as a reliable
method of attaching it.
• This appliance is for household use only, and not for industrial use. It is dangerous to use it for
any purpose (e.g., vacuuming liquids, dust from construction work, cement, etc.).
• Do not modify or repair the appliance. If the cord or any other part of the appliance is damaged,
do not use it and take it to an authorised technical service centre.
• Do not use parts or accessories that are not supplied or recommended by SOLAC.
• Before plugging the appliance into the mains, check that the specified voltage matches your
home voltage.
• Do hang up the appliance by the cord. Always unplug the appliance by pulling the connection
pin, and not the cord.
• Avoid the power cord coming into contact with sharp edges or hot surfaces. Do not allow the
cord to hang over the edge of a table or worktop to avoid children pulling on it and causing the
appliance to fall.
• Remove all elements from the inside or outside of the appliance used for protection during
transport or for sales promotions, such as paper or plastic bags, plastic sheets, cardboard and
stickers.
• Never handle the vacuum cleaner or the plug with wet hands.
• Never use the vacuum cleaner without the dust container or protective filters fitted
correctly.
• Always keep air inlets and outlets clear.
• Keep hair, clothes, fingers and all other parts of the body away from the air inlets and outlets.
• Do not use the vacuum cleaner to clean animals.
• Be very careful when using the vacuum cleaner on stairs.
• Connect the charger directly to the wall socket; do not use an extension cord.
• Do not use or charge the vacuum cleaner outside.
• Avoid splashing water on the charger or the power cord.
• Only use the supplied charger and batteries to charge the appliance.
• Never immerse the charger in water or any other liquid, or put it in a dishwasher. Do not allow
the charger to come into contact with water during cleaning.
• Do not touch the charger with wet hands when it is plugged in.
• Never leave the charger working on a wet surface or cloth.
• Do not connect any metal to the connectors (9) as a short-circuit may cause an accident
• All repairs or battery replacements should be performed by an Authorised Technical Service.
AE2550.book Page 14 Thursday, November 14, 2013 5:37 PM
