Sola VESTA-2813 NS PLUS Скачать руководство пользователя страница 7

Страница: 7 / 80

- 7 -

2.2 GENERAL SAFETY PROVISIONS

- Check that working and traffic conditions are

safe each time before starting the machine.

- Check that no-one is in the machine's working

area or nearby.

- Observe the traffic signs and regulations when

using public highways.

- It is strictly forbidden to climb on the machine

during work and transport.

- Before starting the machine, familiarise your-

self with all drive parts and their operation.

- Pay particular attention when hitching and

unhitching the machine to the tractor.

- The power take-off transmission must be pro-

tected and in good condition. Use the chain

provided to prevent the protective tube from

turning.

- Only fit the power take-off transmission with

the engine turned off.

- Make sure that everyone is at a safe distance

before turning on the power take-off.

- Never leave the driver's seat while the ma-

chine is moving.

- Do not place foreign objects in the hopper.

- Depressurise the circuit and stop the tractor en-

gine before working on the hydraulic system.

- The hydraulic circuits' pipes and hoses undergo

natural ageing in normal conditions. These parts'

service life should not exceed 6 YEARS. They

should be inspected regularly and replaced at

the end of their service life.

- Lock the lowering control when transporting

the seed drill with the coulter unit raised. Be-

fore leaving the tractor, mount the support

legs, lower the coulter unit to the ground and

remove the starter key from the tractor.

- When carrying out maintenance work with

the machine raised, always use sufficient sup-

port elements to prevent the machine from

lowering.

- Before sowing, assess the possible risks that

the area may have, such as steep slopes, pos-

sible contact with overhead power lines due

to unevenness of the ground and/or the posi-

tion of the machine's moving parts.

Содержание VESTA-2813 NS PLUS

















































































Результаты поиска

Содержание VESTA-2813 NS PLUS

Отзывы:

Похожие инструкции для VESTA-2813 NS PLUS

Бренды по названию

Популярные бренды

Sola VESTA-2813 NS PLUS, Руководство пользователя

Результаты поиска

Содержание VESTA-2813 NS PLUS

Отзывы:

Похожие инструкции для VESTA-2813 NS PLUS

Бренды по названию

Популярные бренды