manualshive.com logo in svg

Sola VESTA-2813 NS PLUS, Руководство пользователя


Поделиться
Скачать
background image

- 38 -

6.3.3.2 

 

EXTERNAL KIT HOPPER - MICRO-
GRANULATE FERTILIZER DISPENSER

This kit for microgranulate fertilizer has two hoppers (Fig. 

6.44) with a total capacity of 410 litres; each hopper feeds a 

dispenser. 

Depending on the number of distribution heads in the coul-

ter unit, this kit can dispense two different products (one in 

each hopper) or just one product. If the coulter unit has only 

one distribution head, two different products can be dis-

pensed; if the coulter unit has two distribution heads, only 

one product can be dispensed.

Fig. 6.44

Fig. 6.44

The dose is variable. For models with ISOBUS, you must ac-

tivate the monitor; and for models with mechanical trans-

mission, you will have to change some sprockets. If your ma-

chine has a mechanical transmission, follow the steps below 

to change the sprockets:

1-

 

 

Release the two fasteners to remove the chain cover (Fig. 6.45).

Fig. 6.45

Fig. 6.45

2-

 

 

To remove the chain, loosen the take-up sprocket with the han-

dle located at the rear of the housing (Fig. 6.46).

Fig. 6.46

Fig. 6.46

BEHIND TRANSMISSION 

BEHIND TRANSMISSION 

BOX

BOX

Содержание VESTA-2813 NS PLUS

















































































Отзывы:

Нет отзывов

Похожие инструкции для VESTA-2813 NS PLUS

Бренды по названию

Популярные бренды

Загрузить еще бренды