manualshive.com logo in svg

Sola ARES-2713, Руководство по эксплуатации, Страница: 5 / 40

Поделиться
Скачать
Sola ARES-2713 Скачать руководство пользователя страница 5

5

1. INTRODUCTION

It is essential to read and follow the instructions and recom-

mendations in this manual before operating the seed drill 

ARES-2713

. Careful reading enables maximum operator ef-

ficiency, prevents accidents and damage, and increases the 

seed drill’s capacity and life expectancy.

The manual should be read by everyone performing opera-

tional (including preparation, repairs in the field and general 

care of the machine), maintenance (inspection and technical 

assistance) and transportation tasks.

Please ensure that this manual has been read by any per-

son involved in performing 

operational tasks

, (including 

preparation, dealing with mechanical problems and super-

vising the machine), 

maintenance

 (inspection and techni-

cal assistance) and 

transport

.

For your safety, please follow these technical safety instruc-

tions as 

SOLÀ

 will not be responsible for damages caused by 

not observing the information provided.

In the first chapters you will find the Technical Characteris-

tics and Safety Instructions, as well as some essential sowing 

concepts. Basic concepts that are required to operate the 

machine are explained in the Starting and Maintenance sec-

tions. 

The last part of this manual consists of Dosage Tables, detailed by 

seed type.

SOLÀ

 RETAINS THE RIGHT TO MODIFY ILLUS-

TRATIONS, TECHNICAL DATA AND WEIGHTS 

INDICATED IN THIS OPERATING MANUAL, 

IF THESE CHANGES HELP TO IMPROVE THE 

QUALITY OF THE SEED DRILLS.

In this operating manual you will find three different symbols relating to safety:

TO WORK MORE EASILY WITH THE SEED DRILL.

TO PREVENT DAMAGE TO THE SEED DRILL AND OPTIONAL EQUIPMENT.

TO PREVENT PHYSICAL INJURY.

Содержание ARES-2713









































Отзывы:

Нет отзывов