manualshive.com logo in svg

Sola ARES-2713, Руководство по эксплуатации, Страница: 27 / 40

Поделиться
Скачать
Sola ARES-2713 Скачать руководство пользователя страница 27

27

Hold the bout number

Press 

 to “hold” the current bout when the drill goes out 

of work.

The display will flash 

‘STOP’

.

 

Press 

 againts to resume the normal bout sequence.

Symmetric Tramlining Sequence

2+2 seed spouts are closed during the tramline bout only.

The instrument will beep once the beginning of the tramline 

bout, and the display will continue flashing for the duration 

of the bout.

Asymmetric Left Tramlining Sequence

Two seed spouts are closed on the left hand side of the drill 

on the tramline bouts. The instrument will beep once the 

beginning of each tramline bout, and the display will contin-

ue flashing for the duration of the bout.

TRAMLINE BOUTS

Asymmetric Right Tramlining Sequence

Two seed spouts are closed on the right hand side of the drill 

on the tramline bouts. The instrument will beep once the 

beginning of each tramline bout, and the display will contin-

ue flashing for the duration of the bout.

Содержание ARES-2713









































Отзывы:

Нет отзывов