Sola ARES-2713, Руководство по эксплуатации, Страница: 20 / 40

20
7- ADJUSTING SEED PLANTING
DEPTH
SEED DRILL SHOULD ALWAYS WORK HORI-
ZONTALLY, WITH BOTH THE REAR AND FRON-
TAL TINE COULTERS EQUALLY PENETRATING
THE LAND.
VERY IMPORTANT: THE TRACTOR’S CON-
TROLLER THAT MOVES THE FOLDING PARTS’
CYLINDER MUST BE IN FLOTATION MODE, TO
BETTER ADAPT TO THE GROUND.
7.1 ADJUSTING RATCHETS AND SPINDLES
There are 2 central spindles
for the sowing unit (A) and
2 on the depth-control side
wheels. All have a scale to
show their position.
For models with rear cultivator, this is adjusted by 2 spindles
(B).
ADJUST BOTH SIDES EQUALLY
A
B
C
After adjustments, the control lever of the ratchet should be
pulled back towards the inner part of the machine.
WHEN SOWING ON TILLED OR NON-COMPACT
GROUND, TAKE THE PRECAUTION OF SELECT-
ING ONE OR TWO POINTS LOWER IN THE AD-
JUSTING SCALE ON THE SIDE WHEELS IN OR-
DER TO AVOID SINKING INTO THE GROUND.
To adjust the side wheels, use the crank provided.
Steps to follow for the regulation of equipment:
1
2
1-
To adjust the side
wheels, use the crank
provided.
2-
Unlock using the se-
curing knob (2).
3-
Turn the crank right or
left as required (1).
4-
Use the scale to reach
the suitable height.
7.2 INCLINATION OF THE FOLDING PARTS
At the connection point between
the folding parts and the central
chassis, there are adjustable stops
(two each side) which allow the in-
clination angle of the folding parts
to change.
1-
Loosen the 2 securing nuts.
2-
Remove the 2 screws.
3-
Place the stop in the desired position.
4-
Insert the 2 screws and tighten them using the 2 securing
nuts.
DURING NORMAL SOWING CONDITIONS, THE
FOLDING PARTS SHOULD BE SLIGHLTY LOWER
THAN USUAL TO ADAPT TO TERRAIN IRREGU-
LARITIES. IN VERY TILLED OR LOOSE LAND, AS
WELL AS IN SOILS WITH HIGH HUMIDITY, THE
FOLDING PARTS SHOULD BE LEVELLED TO
STAY HORIZONTAL.