48
Start up and driving
Keyless entry function
The keyless entry function is available only when the smart key is
in the access function activation area.
Activate the keyless entry zone
1. The vehicle will sense the smart key when it is within the car.
2. This area within about 1.2 m from the keyless button on the
main and auxiliary drive door handle;
3. The tailgate opening area is within 1.2m from the tailgate
opening button.
Keyless unlocking, locking
To unlock: press the unlock symbol on the keyless entry button,
all four doors will unlock, the indicators will flash twice.
To lock: press the lock symbol on the keyless button, all four
doors will lock at the same time, the indicators will flash once.
Operation of the keyless button does not lock the door in the
following cases:
1. Igntion is turned on
2. The smart key is inside the car
3. A door or the tail gate, tailgate is not closed;
Tail gate opening
Place the smart key in the tail gate activation area, with the tail
gate locked. Press the bottom of the back of the smart key,this
will open the tail gate.
Keyless start
Before starting:
1. Turn off unnecessary electrical
appliances;
2. Ensure that the smart key is in the
compartment activation area;
3. The gear shift lever is in the “P” or “N”
position.
4. Depress the brake pedal;
Press the start switch, the engine is started
Turn off the engine
1. When the speed is less than 4km / h, pressing the start
button will switch off the engine.
2. In case of an emergency, turn off the engine by pressing the
start the button for more than 3s.
!
Warning
Do not turn off the engine while the vehicle is running – this will
result in loss of the control of the car.
Note
If the vehicle has been travelling for a long time under a high
engine load, the engine may overheat after shut down. In order
to avoid damage to the engine, run in neutral for 2 mins before
Содержание DFSK Glory 580
Страница 1: ...DFSK GLORY 580 HANDBOOK ...
