Sokkia CX-62 Скачать руководство пользователя страница 3

Страница: 3 / 315

SURVEYING INSTRUMENTS

OPERATOR’S MANUAL

• Thank you for selecting the CX-62/65.
• Please read this operator's manual carefully before using this

product.

• Verify that all equipment is included.



"List of standard components" (separate sheet)

• CX has a function to output data saved in the CX to a connected

host computer. Command operations from a host computer can
also be performed. For details, refer to "Communication manual"
and ask your local dealer.

• The specifications and general appearance of the instrument are

subject to change without prior notice and without obligation by
TOPCON CORPORATION and may differ from those appearing in
this manual.

• The content of this manual is subject to change without notice.
• Some of the diagrams shown in this manual may be simplified for

easier understanding.

CX-62
CX-65

Compact X-ellence

Station

CLASS 3R Laser Product

Содержание CX-62




























































































































































































































































































































Результаты поиска

Содержание CX-62

Отзывы:

Sokkia CX-62, Руководство оператора, Страница: 3 / 315

Результаты поиска

Содержание CX-62

Отзывы: