Sokkia CX-62 Скачать руководство пользователя страница 152

Страница: 152 / 315

144

21. MISSING LINE MEASUREMENT

5. Input coordinates for the 2nd

target and press

[OK]

The following values are
displayed:
SD: Slope distance of the starting

position and 2nd target.

HD: Horizontal distance of the

starting position and 2nd
position.

VD: Height difference of the

starting position and 2nd
target.

• Target height of the starting

position and 2nd target can be
input.
Press

[Tgt.h]

on the second

page.

Input the target heights and
press

[OK]

• Press

[COORD]

to re-input

coordinates for the first or 2nd
targets.

• Pressing

[REC]

displays the

result recording screen for
missing line measurement.
Pressing

[OK]

records the

measured results.

• When

[S/%]

is pressed, the

distance between two points (S)
is displayed as the gradient
between two points.

• Press

[MEAS]

to observe the

starting position.



"PROCEDURE Measuring

using observation"

MLM

20.757m

27.345m

1.012m

REC

MOVE

MEAS

MLM

Target height

P T 2

1.500m

P T 1

1.500

Содержание CX-62




























































































































































































































































































































Результаты поиска

Содержание CX-62

Отзывы:

Sokkia CX-62, Руководство оператора, Страница: 152 / 315

Результаты поиска

Содержание CX-62

Отзывы: