manualshive.com logo in svg

Sokkia CX-62, Руководство оператора, Страница: 141 / 315

Поделиться
Скачать
Sokkia CX-62 Скачать руководство пользователя страница 141

133

20. OFFSET MEASUREMENT

5. Sight the offset point and press 

[MEAS]

 in the first page of the 

OBS mode screen to begin 
measurement. 
The measurement results are 
displayed. Press 

[STOP]

 to stop 

the measurement.

6. Accurately sight the direction of 

the target point and press 

[OK]

.

The distance and angle of the 
target point are displayed.

7. After finishing measurement, 

press 

[YES]

 to return to <Offset>.

By measuring the distances between the target point and the two offset points.
Install two offset points (1st target and 2nd target) on a straight line from the target 
point, observe the 1st target and 2nd target, then enter the distance between the 
2nd target and the target point to find the target point.

• It is possible to make this measurement easily using the optional equipment: 

the 2-point target (2RT500-K). When using this 2-point target, be sure to set 
prism constant to 0.

"7.2 Levelling"

20.3 Two-distance Offset Measurement

XYZ

MEAS

OK

SD

ZA

HA-R

2nd meas. OK ?

SD

ZA

HA-R

REC

XYZ

NO

YES

Содержание CX-62




























































































































































































































































































































Отзывы:

Нет отзывов