35
QR CODE
FEATURE
Once a borehole has been completed and imported
to the evaluation software, you can then print a
QR code for that specific borehole. This QR code can
then be stuck to your borehole to help you initiate a
run in the future.
Tap the Scan icon (See right). This will take you to a QR scanner.
The scanner will read the QR code and take you straight to the readings
page. This method will allow you to initiate the run even if you are using
another tablet that doesn’t have the borehole programmed.
When performing the run this way, the prompt buttons at the bottom
of the screen will change in the following way.
“Pull” will appear to inform you to pull the cable up to the next depth
marker, this will initiate the saving process.
“Save” will appear once you have pulled the cable to the next depth to
inform you the readings are being saved.
“Wait” appears when the readings are not within the predetermined
stability range. The prompt will disappear once the unit is stable.
