3.4
Configuration of the module individual parameters via cable
In following part of the document there is a description of these parameters of the WB169-RFG module, that can
be displayed and examined from PC connected to the module by configuration cable. Some of the parameters can
be changed by configuration commands entered
”
from the console” of the serial line communication program as
described in paragraph
of this document.
3.4.1
List of WB169-RFG module configuration parameters
List of all configuration parameters of the module can be displayed by entering of
”show”
command and pressing
of
”
ENTER” key. The following list of parameters will display in the terminal window:
GW33H7-0#show
-- CPU info --
CPUID : 411fc271
FPU Type : 00000002
Flash size 2048 kB
Flash bank size 1048576 B, 0x00100000
Flash base addr 0x08000000
CPU UID 3339510a001c0036
SW version 1.02, date Apr 19 2021
-- HW configuration --
Active bank : 2
Name : GW33H7
Type : 2, version 1
Vendor ID : 0000000000
Mac addr : 0004d0ffffff
x32 0.00 ppm
In slot P card : ’RF169, cc1120, LNA’, type 122, version 1
In slot L card : ’GSM LTE, SIM7600E’, type 140, version 1
GW33H7-0#
As can be seen from the example, the report contains the identification data of the module as well as data on its
hardware configuration and software version.
3.4.2
Displaying a summary of configuration commands (”HELP”)
List of all configuration commands (”HELP”) can be displayed by entering of
”?”
command into the command
line and pressing of
”
ENTER” key. The following list of commands will display in the terminal window:
WB169-RFG
7
