Softing FG-200 HSE/FF, Руководство пользователя

Страница: 75 / 82

Chapter 9 - Appendix
Version EN-112021-1.30.3
75
9.5 Modbus exception responses
ExceptionCode = 02
The FG-200 will send an exception response with [ExceptionCode = 02] if [start address] or [start a
quantity of registers] is not OK.
ExceptionCode = 04
The FG-200 will send an exception response with [ExceptionCode = 04] if one of the requested registers
does not contain valid data. Please note that after power-on the FG-200 responds with [ExceptionCode =
04] until all requested data are read from the connected H1 field devices.
9.6 Assign a second (local) IP address under Windows 8.1
1. Open the Desktop .
2. Press the
Windows start key
and select
Control Panel
.
3. Select Network and Internet .
4. Open Network and Sharing Center .
5. Click Connections .
6. In the Connection Status window click Properties .
7. In the item connection list select
Internet Protocol Version 4 (TCP/IPv4)
.
8. Click Properties . In the General dialog, the regular (first) IP address, the subnet mask and the standard
gateway are shown.
9. Click Advanced to add a second IP address. Then click [Add] in the IP Addresses dialog.
10. Enter the IP address and the subnet mask.
11. Click [Add] .
12. Then confirm all open dialogs with [OK] .