Softing FG-200 HSE/FF, Руководство пользователя

Страница: 36 / 82

FG-200 HSE/FF Modbus - User Manual
36
Version EN-112021-1.30.3
6.5 Configuration
Note
Settings performed on the web interface are not automatically transferred from the primary
to the secondary FG-200. The secondary FG-200 must also be configured separately.
6.5.1 Settings
6.5.1.1 General Settings
Enable automatic VCR Creation
If this feature is activated, the FG-200 establishes the VCR connection by itself.
Examples:
§
Softing Communication Configuration Tool ComConf: activate
§
Emerson AMS™ Software: activate
§
NI-FBUS Configuration Tool: deactivate
Note
The feature Enable automatic VCR Creation has to be activated when the tool comConf is to
be used for the Foundation fieldbus configuration.
Display Blocks
This feature enables or disables the point page functionality.
Hint
The use of the point pages creates a lot of traffic of the FF-H1 network. If you do not use this
Monitor feature then you can save more H1 bandwidth and faster reaction time over
Modbus.
35