background image

Notice

This manual contains important safety instructions that must be followed during installation 
and maintenance of the equipment.

Save these instructions!

This manual must be considered as an integral part of the equipment, and must be available 
at  all  times  to  everyone  who  interacts  with  the  equipment.  The  manual  must  always 
accompany the equipment, even when it is transferred to another user or field.

Copyright Declaration

The copyright of this manual belongs to Shenzhen SOFARSOLAR Co., Ltd. Any corporation or 
individual should not plagiarize, partially copy or fully copy it (including software, etc.), and 
no  reproduction  or  distribution  of  it  in  any  form  or  by  any  means.  All  rights  reserved. 
SOLARSOFAR  reserves  the  right  of  final  interpretation.  This  manual  is  subject  to  change 
according  to  user ’s  or  customer ’s  feedback.  Please  check  our  website  at 
http://www.sofarsolar.com for latest version.

Shenzhen SOFARSOLAR Co ., Ltd.

All rights reserved

    

Shenzhen SOFARSOLAR Co ., Ltd.

C

I

Preface

Please read the product manual carefully before installation, operation or maintenance. This 
manual  contains  important  safety  instructions  and  installation  instructions  that  must  be 
followed during installation and maintenance of the equipment.

This manual is for qualified person (support person, service person are qualified mentioned in 
this manual). 

Outline

Scope

Target Group

Symbols Used

This  manual  provides  safety  operation  information  and  uses  the  symbol  in  order  to  ensure 
personal and property security and use the inverter efficiently when operating the inverter. 
You must understand these emphasize information to avoid the personal injury and property 
loss. Please read the following symbols which used in this manual carefully.

This product manual describes the assembly, installation, commissioning, and maintenance of 
the following inverters.
SOFAR 10000-Sx  SOFAR 15000-Sx  
SOFAR 17000-Sx    SOFAR 20000-Sx(x=2,4,5)
Keep this manual where it will be accessible at all times.

Danger  indicates  a  hazardous  situation  which,  if  not  avoided,  willresult 
in death or serious injury.

Warning  indicates  a  hazardous  situation  which,  if  not  avoided,  could 
result in death or serious injury.

Caution  indicates  a  hazardous  situation,  if  not  avoided,  could  result  in 
minor or moderate injury.

Attention indicates there are potential risks

.

 If fail to prevent, may lead 

to equipment cannot run normally or property damage.

Note  provides  tips  that  are  valuable  for  the  optimal  operation  of  the

product.

Danger

Warning

Caution

Attention

Note

All rights reserved

    

Shenzhen SOFARSOLAR Co ., Ltd.

C

II

SOFAR 10K~20KTL
User manual

SOFAR 10K~20KTL 
User manual

ADD:Building NO.4,Antongda Industrial Park,NO.1,Liuxian Avenue, Bao

an

 

District

,

Shenzhen

,

China

Содержание SOFAR 10K










































Отзывы: