Sofarsolar SOFAR 10K, Руководство пользователя

Страница: 12 / 41

All rights reserved Shenzhen SOFARSOLAR Co ., Ltd. C 17 All rights reserved Shenzhen SOFARSOLAR Co ., Ltd. C 18
Prepare tools required for installation and electrical connections.
3.3 Tools
Table3-1 Shows the components and mechanical parts that should be delivered
Tool Function
Hammer drill
Adjustable wrench
Flat-head screwdriver
Socket wrench
Rubber mallet
Removal tool
Diagonal pliers
Wire stripper
With a drill bit of Φ8.0
Model
Used to drill holes on the wall
Used to tighten expansion bolts
Used to tighten or loosen screws when
installing AC power cables.
Used to tighten ground bolts
Used to hammer expansion bolts into
holes
Used to remove DC connectors from the
SOFAR 10-20KTL
Used to remove AC connectors from
the SOFAR 10-20KTL
.
Note: The torque screwdriver and flat-head
screwdriver are alternative.
Used to cut and tighten cable ties
Used to peel cable jackets
With an open end of larger
than or greater than 32 mm
M4
M5
N/A
N/A
N/A
N/A
R 45 crimping tool J
Used to prepare RJ45 connectors for
Communications cables N/A
Measuring tape
Tool Model Function
0
-
180
º
Cable cutter
Hexagon socket
Crimping tools
Vacuum cleaner
Multimeter
Marker
Level
ESD gloves
Safety goggles
Anti-dust respirator
Used to measure distances
Used to mark signs
Used to ensure that the rear panel is
properly installed
Operators wear ESD gloves when
installing equipment.
Punch operator wearing
Punch operator wearing
Used to cut power cables
M6 use to uninstall and install the front
top cover and down cover.
M4 use to install the rear panel on
theSOFAR 10-20KTL.
Used to crimp power cables
Used to clean up dusts after drilling
holes
Used to check grounding
N/A
M4,M6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
R 45 J 2PCS
SOFAR 10K~20KTL
User manual SOFAR 10K~20KTL
User manual