Anti-Reverse Power Controller
Quick Installation Guide
防逆流控制器快速安装指导
Shenzhen SOFARSOLAR Co.,Ltd. c
Page 1
设备需求
Equipment Required
防逆流控制器
Anti-Reverse Power Controller, ARPC is abbreviation of the Anti-Reverse Power Controller as follows.
电流互感器, 精度要求≤
1%
Current sensor, CT is abbreviation of the current sensor as follows. Appropriate CT’s with rated
with 1% accuracy or less
电压采样线缆，线缆规格:
AWG 12~18
Voltage sampling cable,
cable section: AWG 12~18
电流互感器信号延长线缆，线缆规格：
AWG 20~22
CT sampling extension
cable, cable section: AWG 20~22
限载信号线缆，推荐使用网线或
AWG 20~22
Loading limit cable
，
we recommend using network cable or AWG 20~22
设备安装
Installation
步骤一：选择合适的墙面，对准防逆流控制器的安装孔位钻两个孔，并将膨胀管敲进孔内；
Step1
:
Choose the position for drilling holes, and then mark the holes position by using a marker,
use the hammer drill to drill hole on the wall. Then put the rear panel on the wall.
步骤二：用自攻螺丝固定防逆流控制器。
Step2
:
Put the ARPC on the wall, and use the screw to fix the ARPC.
电气连接
Wiring
1
. 打开上盖，安装地线
Open the cover,
connect the PE wire using OT terminal
Step1
Step2
485A 485B RY
6 RY
5 RY
4 RY
3 RY
2 RY
1 COM
ITB
ITA
ISB
ISA
IRB
IRA
T
S
R
N
