Shenzhen SOFARSOLAR Co.,Ltd. c
Page 4
逆变器限载信号线连接说明
Description of connection of load limit signal wires of inverter
步骤一：打开下盖，限载信号线穿过防水接头并锁好端子；
Step1
:
Open the bottom cover,
the wire through the waterproof joint and locks the
terminal
步骤二：插入端子并锁好螺丝
Step2
:
Insert the terminal and lock the screw
不同型号机器限载信号线顺序不同
The order of the signal wire is different in different models
如图所示，图a为4-12KTL-X逆变器限载信号线连接示意图，图b为其他型号逆变器限载信
号线连接示意图。
As shown in the figure, figure a is the schematic diagram of the connection of the
load limit signal wires of 4-12KTL-X inverter, while figure b is the schematic
diagram
of the connection of the load limit signal wires of other inverters.
图a（2）
Fig a
（2）
图a（1）
Fig a
（1）
