Shenzhen SOFARSOLAR Co.,Ltd. c
Page 3
提示
2:
正确的
CT
位置放置如下图
NOTE2: The correct CT position is placed as the following
On-Grid Inverter
Load
CT
Import/Export Meter
PV Panels
Grid
Current sample
Loading limit
On-Grid Inverter
On-Grid Inverter
Load
Load
Current Sensor
Current Sensor
Import/Export Meter
Import/Export Meter
防逆流控制器
Anti-Reverse Power Controller
ZERO
PULL
防逆流控制器
Anti-Reverse Power Controller
ZERO
PULL
ARPC
ARPC
PV Panels
PV Panels
Grid
Grid
Voltage sample
Voltage sample
Loading limit
Loading limit
提示
3: CT
不能放到
N
线和地线上
NOTE3: Don’t place the sensor on the N wire or the earth wire
提示
4: CT
不能同时穿过
L
线和
N
线
NOTE4: Don’t place the sensor on the N and L wire simultaneously.
提示
5: CT
延长线不能超过
100
米
NOTE5: The length of CT’s cable cannot over 100m.
防逆流控制器
Anti-Reverse Power Controller
ZERO
PULL
ARPC
Voltage sample
4.
连接限载信号线
Connect the loading limit signal wires
连接
ARPC COM
到逆变器能量管理模块的
GND.
Connect ARPC’
S COM to the GND pin of the Inverter Power Control Module.
连接
ARPC RY1
到逆变器能量管理模块的
IN1.
Connect ARPC’
S RY1 to the IN1 of the Inverter Power Control Module.
连接
ARPC RY2
到逆变器能量管理模块的
IN2.
Connect ARPC’
S RY2 to the IN2 of the Inverter Power Control Module.
连接
ARPC RY3
到逆变器能量管理模块的
IN3.
Connect ARPC’
S RY3 to the IN3 of the Inverter Power Control Module.
连接
ARPC RY4
到逆变器能量管理模块的
IN4.
Connect ARPC’
S RY4 to the IN4 of the Inverter Power Control Module.
