HYD 5-20KTL-3PH
User manual
Copyright ©Shenzhen SOFARSOLAR Co., Ltd
- 26 -
4.7. Moving the HYD 5-20KTL-3PH
Step 1
Open the packaging, insert hands into the slots on both sides of the inverter
and hold the handles, as shown in Fig.4-4.
Fig. 4-4 Moving the inverter
①
②
Step 2
Lift the inverter from the packing case and move it to the installation
position.
To prevent device damage and personal injury, keep balance when
moving the inverter because the inverter is heavy.
Do not put the inverter with its wiring terminals contacting the floor
because the power ports and signal ports are not designed to support the
weight of the inverter. Place the inverter horizontally.
When placing the inverter on the floor, put foam or paper under the
inverter to protect its shell.
Attention
4.8. Installing HYD 5-20KTL-3PH
Step 1
Determine the positions for drilling holes, ensure the position of holes are
level, then mark they with a marker pen, use the hammer drill to drill holes on the
wall. Keep the hammer drill perpendicular to the wall, do not shake when drilling,
so as not to damage the wall. If the error of the hole is too big, you need to
reposition.
Step 2
Insert M8*80 expansion bolt vertically into the hole and pay attention to the
insertion depth of the expanding bolt (should be deep enough).
Step 3
Align the
Wall hanger
with the position of holes, fix the
Wall hanger
on the
wall by tightening the expansion bolt with the nuts.
Step 4
Hang the inverter on the wall hanger first, and then fix the inverter and the
wall hanger with M6 hexagon socket screws.
Step 5
In order to prevent theft, the user can configure a suitable small lock to lock
the inverter and the wall rack (optional).
