socomec SUNSYS H30, Инструкция по установке и эксплуатации

Страница: 26 / 40

26
SUNSYS H30-H30i
- Ref.: IOMSUNHMXX04-GB 00 26
5. COMMISSIONING
5.3. Protection autotest procedure
The user can make sure the Interface Protection System is working properly by activating the autotest via the menu COMMANDS
> AUTOTEST .
Moreover, this menu can be used to check whether the inverter has been disconnected properly in the event of a discharge to earth
(GFCI Autotest), in the same way as the test for a differential switch.
Before activating the desired test, make sure that the inverter is switched on and supplying power.
You can check whether the following devices have intervened correctly:
Protection Description
V> Maximum network voltage limit intervention test (restrictive threshold)
V< Minimum network voltage limit intervention test (restrictive threshold)
V>> Maximum network voltage limit intervention test (permissive threshold)
V<< Minimum network voltage limit intervention test (permissive threshold)
f> Maximum network frequency limit intervention test (restrictive threshold)
f< Minimum network frequency limit intervention test (restrictive threshold)
f>> Maximum network frequency limit intervention test (permissive threshold)
f<< Minimum network frequency limit intervention test (permissive threshold)
GFCI Differential current to earth exceeded intervention test