socomec SUNSYS - B10, Инструкция по установке и эксплуатации

Страница: 12 / 54

12
5. INTALLATION INSTRUCTION
5.1. Inside the Package
After opening the package, please check the contents of the box.
It contains the following items:
1. N°1 Photovoltaic Inverter;
2. N°1 User
’s Manual;
3. N°6 Screw (M4 x 30L) with relative Nylon Drive Anchor;
4. N°2 Security Screw;
5. N°1 Mounting Bracket;
6. N°1 AC Cover;
7. N°2 Rubber Bushing.
5.2. Mounting SUNSYS
– B10
PV inverter
Advice before Installation
To obtain optimal performance, please consider following guidelines before installation:
Do not expose the PV inverter to direct sunlight. Direct sunlight increases the internal
temperature that may reduce conversion efficiency.

Check the ambient temperature of installation is within specified range -20 ~ +60 C.

The grid voltage and frequency at installed site must be within the specific range defined by applicable
regulation type.

Electric utility company has approved the grid connection.

Only qualified personnel are performing the installation and maintenance.

Adequate convection space surrounds the Inverter.

Inverter is being installed away from explosive vapor or dust.

No flammable object is near the Inverter.

No mounting on wooden flammable surface.
SUNSYS
– B10 grid-tied PV inverter can be installed and operated at locations where the
ambient temperature is up to 60 C. However, for optimal operation, it is recommended that
Inverter is installed where the ambient temperature is between 0 to 40 C.