background image

ITYS 1-3 kVA - 551430A - SOCOMEC

16

EN

2.3. Recycling

Contact your local recycling or hazardous waste centre for information on 

proper disposal of the used equipment.

Do not dispose of the batteries in a fire. This may cause battery explosion. The 

batteries must be correctly disposed of according to local regulations.

Do not open or destroy the batteries. Escaping electrolyte can cause injury 

to the skin and eyes. It may be toxic.

Do not dispose of batteries in the trash.
This product contains sealed lead acid batteries and must be disposed 
of correctly as explained in this manual. For more information, contact 
your local recycling centres, re-use and treatment facilities.

The crossed-out wheeled bin symbol indicates that waste electrical 
and electronic equipment should not be discarded together with 
unseparated household waste but must be collected separately. The 
product should be handed in for recycling in accordance with the local 
environmental regulations for waste disposal.
By separating waste electrical and electronic equipment, you will help 

reduce the volume of waste sent for incineration or land-fills and minimise 

any potential negative impact on human health and environment.

Содержание ITY3-EX010B









































Отзывы: