CHAPTER 2: SETUP
|
17
5. Click on the
Port Settings
tab. Enter the appropriate settings for your
devices and applications. Do not change any of the default settings in
the Advanced screen. Afterwards, click
OK
to exit the properties
screens.
6. Click
Write to adapter
to configure your CSA with the new settings.
7. Unplug the CSA from the computer. Now you are ready to attach the
CSA to the device.
Click
Write to
adapter
.
Important!
If you do not click
Write to adapter
,
the CSA will not
be configured with
the new settings!
Important!
Be sure to set
the baud rate
to match that
of the local
host serial
port!
You must
also enter the
same baud
rate in any
third party
applications
used with the
CSA!
