12 | CHAPTER 2: SETUP
3. Click on the
Connections
tab. Enter the following settings:
•
Accessibility: Select
Connectable
Uncheck
Only when DTR is asserted by local host
•
Notifications: Select
Do not generate notifications
4. Click on the
Security
tab. Make sure all boxes are unchecked.
5. Click on the
Port Settings
tab. Enter the appropriate settings for your
devices and applications. Do not change any default settings in the
Advanced screen. Afterwards, click
OK
to exit the properties screens.
Select
Connectable
.
Uncheck.
Select
Do not
generate
notifications
.
Important!
Be sure to set
the baud rate
to match that
of the local
host serial
port!
You must
also enter the
same baud
rate in any
third party
applications
used with the
CSA!
