Socket CF RFID Reader Card 6E, Руководство пользователя

Страница: 64 / 65

64
Regulatory Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. This equipment is also CE EN55024:1998 and C-TICK compliant. These
limits are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area may cause harmful interference in which case the user
will be required to correct the interference at his or her own expense.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user may try to correct the interference by doing any
of the following:
•
Reorient or relocate the receiving antenna of the radio or television.
•
Increase the distance separating the equipment and the receiver.
•
Connect the equipment to an outlet on a different branch circuit than that of the receiver.
•
Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet helpful:
How to Identify and Resolve Radio-TV Interference
Problems. This booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402
LASER DEVICES: The Socket barcode scanning product (version 6P) described in this User’s Guide
contains a Symbol SE955 laser scan engine.
For the Class 2 version of this engine, the following applies:
•
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50,
dated July 26, 2001.”
Caution: Use of controls, adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.
•
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such
as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2
laser is not known to be harmful. A label such as the one below should appear on the end product.
Example of Class 2 Laser Warning Label
PRODUCT DISPOSAL: Your device should not be placed in municipal waste. Please check local
regulations for disposal of electronic products.