Socionext SynQuacer E Series Скачать руководство пользователя страница 29

 

Socionext Inc. 
SynQuacer E-Series Assembly Instructions 
http: //www.socionext.com/ 

28/32 

Copyright 2018

 

7.  Items to Periodically Inspect 

Inspect the computer once every six months to a year, for the following symptoms. 

  Unusual sounds coming from the power supply fan 

  Power cord or plug are unusually hot 

  Power cord has a deep scratch or is deformed 

  Computer will not boot up, even when the power plug is inserted 

  Strange odors or smoke 

  Foreign matter or water has gotten into the unit 

  Other abnormality or failure 

 
If you notice any of these problems, remove the power plug from the outlet and be sure to contact the 
Customer Support at Socionext for inspection and repair, to avoid the risk of product failure or 
accidents. 

URL

http://www.socionext.com/en/

 

  [Contact US] 

  [Inquiry Form] 

 

8.  Recommended Storage Locations and Methods 

of Care

 

8-1.  Recommended storage locations 

Use this computer by setting it up in a location specified by the conditions below. 
 
Recommended storage conditions 
Use this computer in a location that falls within these conditions. 
 
Indoors 
Within 10

C to 35

C

(*)

 

Within a humidity range of 20 to 80% (no condensation) 
 

(*) 

  This computer may fail to start up when used in a room that is excessively cold

at or below 

10

℃)

If this happens, unplug the power cable, warm up the room and wait for a few hours before trying to 
power up the unit again. 
This will prevent condensation from occurring inside of the unit due to sudden changes in 
temperature, which could lead to short circuits in the components and cause the product to fail. 

 
Using the computer outside of these conditions may lead to an accident such as a fire, damage to the 
computer, or other trouble such as failure to start up. 
 
This product is not suitable for use in the following locations. 

  Places exposed to direct sunlight or heat, such as places located close to a stove or other heating 

apparatus 

  Places with high humidity, such as near an aquarium or other places next to water 

  Places that are subject to strong magnetic fields, such as powerful magnets, electromagnetic 

cookers and so on 

  Places where at least 10 cm of space is not available between the rear/front panels of this unit and 

the wall 

  Places subject to vibration or impact 

  Outdoor locations or dusty places 

  Places that are unstable, or which could be bumped into by people or other objects 

 

 

Содержание SynQuacer E Series


































Отзывы: