Socionext Inc.
SynQuacer E-Series Assembly Instructions
http: //www.socionext.com/
14/32
Copyright 2018
4-5. Preparing to install the motherboard (installing the memory)
Before installing the motherboard into the case, install the memory. One memory module is included.
1. The motherboard and memory are packaged inside of an antistatic bag. Take them out and place
them on the bag.
2. Release the locking mechanism on the
memory slot (DIMM2).
3. Insert the memory into the memory slot
(DIMM2).
Line up the key (notch).
Insert the memory straight until it firmly fits
into the base of the socket.
Move the locking mechanism back in to lock
the memory in place.
Reference:
When expanding the memory, install as below:
Spec.
DDR4-2133
Available memories
4GB, 1rank, UDIMM (Maximum configuration 8GB = 4GB x 2)
16GB, 2rank, RDIMM (Maximum configuration 64GB = 16GB x 4)
Available
Slots
1pc.
DIMM2
2pcs.
DIMM2/DIMM4
4pcs.
DIMM1/DIMM2/DIMM3/DIMM4
Remarks
If you use with multiple installation,use the same kind of
memories.Also,you can not install 3pcs.
CAUTION
Before installing the memory, touch the case to discharge any static electricity
from your body. Also, when holding the memory and motherboard, hold them on
the edges of both sides, and do not touch the metal parts directly with your
hands. Doing so may cause poor contact or electrostatic damage.
If you are having trouble installing, do not use more force than is necessary.
Remove the memory temporarily and then try installing once more.
Memory
Motherboard
DIMM4
DIMM3
DIMM1
DIMM2
DIMM2
DIMM2
