SnowWolf AlphaBlower 33-100-H, Руководство по эксплуатации и техническому обслуживанию, Страница: 35 / 98

33 AlphaBlower Operation and Maintenance Manual
Operation
Operating The
AlphaBlower
Operation
AVOID INJURY OR DEATH
While operating the machine:
•
Always keep seat belt fastened
.
•
Safety seat bar lowered (if equipped)
Always keep your feet on the pedals or
footrests and hands on the controls
AVOID SERIOUS INJURY OR DEATH
Always be aware of overhead obstacles or
power lines when operating the snow
blower.
AVOID SERIOUS INJURY OR DEATH
Never direct discharge toward
bystanders, buildings or other property.
Debris can be thrown great distances.
AVOID SERIOUS INJURY OR DEATH
If the auger / chute becomes clogged with
snow, Turn the machine’s engine off. Use a
clearing rod, never insert hands or feet into
the chute or auger opening.
Enter the machine. (See “Entering The Operator’s
Position” on page 24.)
Start the engine and release the parking brake.
Raise the snow blower slightly off the ground.
Move to the work area.
Engage the machine’s auxiliary hydraulics. (See
the machine’s Operation Manual for correct
procedure.)
Set the snow blower at the recommended working
position.
Raise the engine RPM to attain proper rated PTO
speed.
Rotate the snow blower discharge chute to the
desired position. The discharge chute can be
rotated at any time by using the auxiliary circuit.
Adjust the deflector to control the distance the
snow is thrown.
NOTE: Always be sure the snow blower is
level (parallel) with the ground when
operating, to insure proper cutting
edge and wear shoe/gauge wheel
wear.
NOTE: The machine speed is determined by
the depth and density of the snow
being moved. Adjust speed as
required.