SnowWolf AlphaBlower 33-100-H, Руководство по эксплуатации и техническому обслуживанию

Страница: 30 / 98

28
AlphaBlower Operation and Maintenance Manual
Operation
Figure 3
[Figure 3] shows the relation between the height
(H) of the tractor’s PTO and the angle of the PTO
shaft during towing/reversing and front mounting
respectively.
Use the diagram as follows:
1. Measure the height H from ground level up to
the center of the tractor’s PTO stub shaft (Item
1).
2. Measure the horizontal distance B from the
end of the tractor’s PTO stub shaft to the
tractor drawbar ball.
3. Mark the position of the PTO stub shaft end
(Item 1) in the diagram for the figures. Grid
pattern is 2” x 2”.
4. Mark the link (Item 2) at a distance of 2.3” from
the end of the PTO stub shaft.
5. Read the angle using the dashed angle lines.
Angles greater than 20° result in abnormally
high wear and reduced service life of PTO
shafts.
PTO SHAFT ANGLE - REVERSING
PTO SHAFT ANGLE - FRONT MOUNTING
2
1
3
2
1
3
B
H
H
B
15°
20°
5° 10°
15°
20°
5°
10°
20.5”
14.25”
11.75” 11.75”
23.5”
2.25”
15.75”
2”
2”
19.5”
26.5”
7”
11.75” 11.75”
23.5”
2.25”
2”
2”
15.75”
23.5”