SnowWolf AlphaBlower 33-100-H, Руководство по эксплуатации и техническому обслуживанию

Страница: 25 / 98

23 AlphaBlower Operation and Maintenance Manual
Operation
AlphaBlower Inspection
Daily Inspection
NOTE: Inspect the snow blower by performing
a walk around daily before and after
use. Use the following inspection
checklist as a guideline.
• Verify that the snow blower is properly
connected to the machine.
• Check that all shields and guards are in place.
• Check for damaged or leaking hydraulic hoses
or fittings. Replace if necessary.
• Check the cutting edge for wear or damage.
Replace if necessary.
• Check that all cotter pins that retain pivot/
anchor pins are in place and not damaged or
missing.
• Check the snow blower to ensure that all
components are secure and that all bolts and
nuts are thoroughly tightened.
• Check the snow blower mounting hardware for
wear or damage. Inspect the pins and mounts
for wear or damage. Repair or replace
damaged parts if necessary.
• Check that all bearings turns freely. Replace
any that are rough or seized.
• Check that the PTO shaft is securely fasten to
the snow blower and to the tractor.
• Check the oil level in the gearbox.
Monthly Inspection
Check the following items every 50 hours of
operation:
• Inspect the snow blower for cracks, bends, or
excessive wear.
• Check wear shoes and gauge wheels (if
equipped) for wear.
• Check that all bolts are tight.
• Check the cutting edge and mounting plate for
cracks or damage. Replace if necessary.
• Check the wing cutting edge’s (if equipped) for
cracks or damage. Replace if necessary.
• Check hydraulic lines, connections and fittings
for hydraulic oil leaks. Repair or replace
damaged parts if necessary.
• Check for damaged or missing decals.
Replace if necessary.
• Lubricate as required.
AVOID SERIOUS INJURY OR DEATH
Before servicing the snow blower:
• Always park on a flat level surface.
• Lower the tractor’s three-point hitch or
loader arms and place snow blower flat
on the ground.
• Place all controls in NEUTRAL.
• Engage the park brake.
• Stop the engine and remove the key.
• Wait for all moving parts to stop.
• Exit the machine.
SEE MACHINE’S OPERATOR’S MANUAL
FOR ADDITIONAL INFORMATION.